DNP3 SLAVE DRIVER DOWNLOAD

This is used to limit the amount of data that a level 2 slave may return per poll. Only one variation should be used for each object type The object Belonging to a class does not imply any sort of priority. A value of 0. Configurable Keep Alive Timer for use in unsolicited mode. Writing a 0 to None Class 1,2 or 3 as configured and Class 0 polls.

Uploader:	Fenrizshura
Date Added:	4 June 2016
File Size:	27.1 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	46662
Price:	Free* [*Free Regsitration Required]

Event data are normally polled at a much faster rate than static data. The meaning of the result code are: Time Offset Time offset between clocks on Slave station slaave Master station. For example if the DNP3 Master send a pulse on with count of 10, on time 10, off time 10 to Try to use as small value as you can less than 50ms.

DNP3 Slave

Operate suffix to only issue the operate command. The result code of the response will be reported in Request application confirmation on multi-fragments or when sending event data. State will latch off For binary outputs, the Unsolicited data buffer time, a value of zero means that events are xlave immediately.

Write Value Action 0 Stop that device immediately and put that device offline. The DNP3 master will remain online when the slave disconnects and will go offline when there is no activity for more than twice the port watchtime or poll intervals.

Request link status with self address The DNP3 master will issue a request link status with self address of 0xFFFC to identify the slave to be associated with this connection.

Default class assignment Class 0.

A non zero value indicates failure. Each event object in the RTU can be assigned to class 1, 2 or 3.

DNP3 OPC Server Configuration Guide

Freeze Writing a zero value to counters or analog inputs will cause the Freeze and Clear command to be issued. Initial value of the.

Events Request application confirmation when sending event data. DO suffix in object name Direct operate is chosen if no qualifier is selected. None Class 1,2 or 3 as configured and Class 0 slavee.

DNP3 Slave - Brodersen A/S

Master Station Mode of operation. Master Devices will accept both time-tagged and non-time-tagged for all event data. The following documentation will only make sense cnp3 you have read the documentation published by the DNP Users group. Enable tag of the device. Enable Level 3 commands, this option should only be enable if the RTU support the following level 3 command: Most communication is unsolicited, but poll for static data to keep its database up to date.

You can inserting a delay between each advise by setting the Preference. WriteOnly" of that slave.

Level 3 RTU allows the Master to assign the class of each event object dynamically. Use 0 for no limit.

State is the Digital value of the state of object 1, variation 2, index 1. Configurable Keep Alive Timer for use in unsolicited mode.

Data Link Layer Confirmation: